|
|
| Author |
Message |
|
| Guest |
 Posted: Tue Jul 04, 2006 11:12 am |
 |
|
|
Guest
|
|
| Back to top |
|
| Guest |
| Posted: Tue Jul 04, 2006 3:41 pm |
|
|
|
Guest
|
Hello Mikael and others,
Thank you very much -- that part worked!!!
My next problem:
Compiler complains about undefined data types (i.e. ctid_t), but I
suspect GCC version that I'm running (will download one for Sol10)
V.
-----Original Message-----
From: Mikael Pettersson [mailto:mikpe@it.uu.se]
Sent: Tuesday, 04 July 2006 3:06 PM
To: Valentin Micic [ MTN - Innovation Centre ];
erlang-questions@erlang.org
Subject: Re: 64-Bit Erlang on SOLARIS 10
On Tue, 4 Jul 2006 13:04:59 +0200, "Valentin Micic [ MTN - Innovation
Centre ]" <Micic_V@mtn.co.za> wrote:
>Can anybody, please, tell me what parameters to pass to configure
>utility in order to force 64-bit support for Erlang emulator.
>
>Thanks in advance.
Assuming it's SPARC and you're using gcc, then you need
to pass -m64 to gcc. On the rare occasion that I do a
64-bit SPARC build, I do it via the following kludge:
cat>/tmp/gcc64
#!/bin/sh
exec gcc -m64 "$@"
^D
chmod +x /tmp/gcc64
env CC=/tmp/gcc64 ./configure <options>
make
Maybe 'env CFLAGS="-O2 -m64" ./configure' would work too.
NOTE: This e-mail message is subject to the MTN Group disclaimer see http://www.mtn.co.za/disclaimer
Post generated from www.trapexit.org |
|
|
| Back to top |
|
| Guest |
| Posted: Tue Jul 04, 2006 5:15 pm |
|
|
|
Guest
|
Has anybody successfully compiled Erlang R11B-0 (or R10B-10) on Solaris
10, using ./configure utility.
I get the following error(s):
make
cd erts/emulator && ERL_TOP=/export/home/micic_v/ERLANG/otp_src_R11B-0
make generate depend
make[1]: Entering directory
`/export/home/micic_v/ERLANG/otp_src_R11B-0/erts/emulator'
make -f sparc-sun-solaris2.10/Makefile generate
make[2]: Entering directory
`/export/home/micic_v/ERLANG/otp_src_R11B-0/erts/emulator'
/tmp/gcc64 -g -O3
-I/export/home/micic_v/ERLANG/otp_src_R11B-0/erts/sparc-sun-solaris2.10
-D_LARGEFILE_SOURCE -D_FILE_OFFSET_BITS=64 -DHAVE_CONFIG_H -Wall
-Wstrict-prototypes -Wmissing-prototypes -DUSE_THREADS -D_THREAD_SAFE
-D_REENTRANT -D_POSIX_PTHREAD_SEMANTICS -Wa,-xarch=v8plusa -Ibeam
-Isys/unix -Isys/common -Isparc-sun-solaris2.10/opt
-Isparc-sun-solaris2.10 -Izlib -Ihipe -I../include/internal
-I../include/internal/sparc-sun-solaris2.10 -c hipe/hipe_mkliterals.c -o
/export/home/micic_v/ERLANG/otp_src_R11B-0/erts/obj.beam/sparc-sun-solar
is2.10/hipe_mkliterals.o
In file included from /usr/include/sys/signal.h:34,
from /usr/include/signal.h:27,
from sys/unix/erl_unix_sys.h:46,
from beam/sys.h:46,
from hipe/hipe_mkliterals.c:37:
/usr/include/sys/siginfo.h:259: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:292: error: parse error before '}' token
/usr/include/sys/siginfo.h:294: error: parse error before '}' token
/usr/include/sys/siginfo.h:390: error: parse error before "ctid_t"
/usr/include/sys/siginfo.h:392: error: conflicting types for `__proc'
/usr/include/sys/siginfo.h:261: error: previous declaration of `__proc'
/usr/include/sys/siginfo.h:398: error: conflicting types for `__fault'
/usr/include/sys/siginfo.h:267: error: previous declaration of `__fault'
/usr/include/sys/siginfo.h:404: error: conflicting types for `__file'
/usr/include/sys/siginfo.h:273: error: previous declaration of `__file'
/usr/include/sys/siginfo.h:420: error: conflicting types for `__prof'
/usr/include/sys/siginfo.h:287: error: previous declaration of `__prof'
/usr/include/sys/siginfo.h:424: error: conflicting types for `__rctl'
/usr/include/sys/siginfo.h:291: error: previous declaration of `__rctl'
/usr/include/sys/siginfo.h:426: error: parse error before '}' token
/usr/include/sys/siginfo.h:428: error: parse error before '}' token
/usr/include/sys/siginfo.h:432: error: parse error before "k_siginfo_t"
/usr/include/sys/siginfo.h:437: error: parse error before '}' token
In file included from /usr/include/signal.h:27,
from sys/unix/erl_unix_sys.h:46,
from beam/sys.h:46,
from hipe/hipe_mkliterals.c:37:
/usr/include/sys/signal.h:85: error: parse error before "siginfo_t"
In file included from sys/unix/erl_unix_sys.h:46,
from beam/sys.h:46,
from hipe/hipe_mkliterals.c:37:
/usr/include/signal.h:112: error: parse error before "siginfo_t"
/usr/include/signal.h:114: error: parse error before "siginfo_t"
make[2]: ***
[/export/home/micic_v/ERLANG/otp_src_R11B-0/erts/obj.beam/sparc-sun-sola
ris2.10/hipe_mkliterals.o] Error 1
make[2]: Leaving directory
`/export/home/micic_v/ERLANG/otp_src_R11B-0/erts/emulator'
make[1]: *** [generate] Error 2
make[1]: Leaving directory
`/export/home/micic_v/ERLANG/otp_src_R11B-0/erts/emulator'
make: *** [depend] Error 2
-----Original Message-----
From: owner-erlang-questions@erlang.org
[mailto:owner-erlang-questions@erlang.org] On Behalf Of Valentin Micic [
MTN - Innovation Centre ]
Sent: Tuesday, 04 July 2006 5:36 PM
To: Mikael Pettersson; erlang-questions@erlang.org
Subject: RE: 64-Bit Erlang on SOLARIS 10
Hello Mikael and others,
Thank you very much -- that part worked!!!
My next problem:
Compiler complains about undefined data types (i.e. ctid_t), but I
suspect GCC version that I'm running (will download one for Sol10)
V.
-----Original Message-----
From: Mikael Pettersson [mailto:mikpe@it.uu.se]
Sent: Tuesday, 04 July 2006 3:06 PM
To: Valentin Micic [ MTN - Innovation Centre ];
erlang-questions@erlang.org
Subject: Re: 64-Bit Erlang on SOLARIS 10
On Tue, 4 Jul 2006 13:04:59 +0200, "Valentin Micic [ MTN - Innovation
Centre ]" <Micic_V@mtn.co.za> wrote:
>Can anybody, please, tell me what parameters to pass to configure
>utility in order to force 64-bit support for Erlang emulator.
>
>Thanks in advance.
Assuming it's SPARC and you're using gcc, then you need
to pass -m64 to gcc. On the rare occasion that I do a
64-bit SPARC build, I do it via the following kludge:
cat>/tmp/gcc64
#!/bin/sh
exec gcc -m64 "$@"
^D
chmod +x /tmp/gcc64
env CC=/tmp/gcc64 ./configure <options>
make
Maybe 'env CFLAGS="-O2 -m64" ./configure' would work too.
NOTE: This e-mail message is subject to the MTN Group disclaimer see
http://www.mtn.co.za/disclaimer
NOTE: This e-mail message is subject to the MTN Group disclaimer see http://www.mtn.co.za/disclaimer
Post generated from www.trapexit.org |
|
|
| Back to top |
|
| Guest |
| Posted: Wed Jul 05, 2006 9:45 pm |
|
|
|
Guest
|
On Tue, 4 Jul 2006 13:04:59 +0200, "Valentin Micic [ MTN - Innovation Centre ]" <Micic_V@mtn.co.za> wrote:
>Can anybody, please, tell me what parameters to pass to configure
>utility in order to force 64-bit support for Erlang emulator.
>
>Thanks in advance.
Assuming it's SPARC and you're using gcc, then you need
to pass -m64 to gcc. On the rare occasion that I do a
64-bit SPARC build, I do it via the following kludge:
cat>/tmp/gcc64
#!/bin/sh
exec gcc -m64 "$@"
^D
chmod +x /tmp/gcc64
env CC=/tmp/gcc64 ./configure <options>
make
Maybe 'env CFLAGS="-O2 -m64" ./configure' would work too.
Post generated from www.trapexit.org |
|
|
| Back to top |
|
|
|
All times are GMT
|
|
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum
You cannot attach files in this forum
You cannot download files in this forum
|
|
|
Digg It
Del.icio.us
Reddit
Facebook
Stumble Upon
Technorati
